CarMind R.E.V and CarMind E.V#

The firmware ships two on-board models. Both say what you are doing and give the three estimates. You choose which one runs in the desktop app.

CarMind R.E.V#

R.E.V keeps learning in your car. The board corrects R.E.V’s fuel estimate from what your car reports while you drive. It also learns an airflow constant that gives your engine size. The model’s core never changes in the car. What R.E.V learned is saved on the SD card.

On the main-branch firmware, a new board starts on R.E.V. A board that already chose a model keeps it.

CarMind E.V#

E.V is fixed and tested. It never learns. The tank size and the fill-up calibration still learn with either model.

Switching models#

  1. Park, then connect the board to the desktop app with its USB cable.

  2. Open the Board page and pick the model under “On-board model”.

The board keeps the choice after a restart. What R.E.V learned stays on the SD card while E.V runs. With R.E.V, page 5 shows a third job, Learning.