When something looks wrong#
The board restarts again and again#
OpenCarMind EdgeOS 2.1.0 restarted about 14 seconds after every start once a car answered and the pattern file from an earlier drive was on the board. The field fix removes the cause (see the README). If a board still restarts in a loop, unplug it from the car and connect it to a computer, where it starts normally. Then import with the desktop app: the drives of that day, drives.csv, the battery logs b*.csv, and obd/resets.csv. That file has one line per start with the reason for the restart, how long the run before it lasted, the task named in the crash record, and the battery’s voltage and temperature.
The Board page says health degraded or bad#
Open the events list on the Summary page. The “Boot health” line names the reason. Health checks and messages says what each one means. A restart often clears a one-off problem. If it comes back, send a photo of the Board page and the events.
A change says “Not now”#
The board refuses changes while it drives, starts, formats or saves power. The message names the reason. Park, wait for the drive to end, then try again (Health checks and messages).
Wi-Fi did not start after a restart#
Wi-Fi waits for the health check, about a minute after a start. To start it now, open Wi-Fi and tap Sync clock now.
Touch stops answering#
The board notices and opens the touch controller again by itself. On the bench that took about 1 second. Wait a moment and touch again.
No speed or rpm#
Check that the ignition is on and the adapter is in the port. Open Settings > OBD ADAPTER, tap Find OBD adapter and note what the screen says. If the pairing sheet appears, check the adapter’s name before you tap Use this adapter.
The board never offers my adapter#
The board offers a new adapter only at a strong signal. Bring the board close to the adapter, then tap Find OBD adapter. If you tapped Not this one by mistake, restart the board.
The clock is wrong#
If Settings says “Not set” or “Estimated, not synced”, join Wi-Fi and tap Sync clock now, or set it by hand in Settings > Set clock. Auto theme needs the clock.
If the events say “Clock sync refused: N min ahead” (or behind), the time server’s answer was more than a day ahead of the clock, or more than 10 minutes behind it, and the board kept its own time. If you know the clock is wrong, set it by hand. The next sync then sets it.
A storage error after a restart#
The board checks and repairs its storage at start. If a store still will not open, import what you can, then use Settings > Format storage.
The screen pauses on a theme change#
A theme change redraws the launcher and the open app once. On the bench that took up to about 0.7 seconds. This is expected.
Known limits#
A crash in the middle of a write can still damage one file. The storage itself survives.
A real power cut is not tested yet. A setting changed less than 500 ms before one is lost.
The events list keeps the newest 10 events since start.
After a test drive, send back#
Photos of the Summary page, of the Drive filter in the events list, and of the Board page.
In the desktop app, connect, pair if asked, then Import. Send the new drive’s files and
drives.csv. They hold your car’s data, so send them only to the person checking the release.A note of anything odd, with the time of day. For example a speed that does not match the speedometer, an AI class that does not follow what you did, any red or amber banner, any “Not now” message you did not expect, any freeze, restart or touch that stopped, and how readable the screen was in daylight.
If the board restarted, the time it happened and a photo of the Board page after it.