Your drives, on your computer#
The OpenCarMind desktop app runs on Windows, macOS and Linux. Download it from the Releases page of the OpenCarMind repository.
Getting connected#
Connect the board with its USB cable. Open the Board page, pick the port (the app marks the one that looks like the board) and choose Connect.
The first time, choose Show a code on the board, type the 6-digit code from the board’s screen and choose Pair. Later connections need no code.
Add Wi-Fi, the time zone and the time server, and send them to the board.
After a drive, connect again and choose Import drives over USB.
What it does#
Import copies new drives from the card into the app’s drives folder, at about 15 KB/s.
Charts show each drive, with fuel and economy per drive and in total.
Fill-ups live on the Fuel page. The app sends them to the board.
On-board model shows which model runs and switches it.
Flash the firmware installs the firmware that ships with the app. This button is for the ESP32-S3 board.
Open card folder, on the Overview, reads an SD card directly, without the board.
First launch#
The installers are not code-signed yet. On macOS, right-click the app and choose Open the first time. On Windows, SmartScreen shows a warning. Choose More info, then Run anyway.