Messages#

Every message and event text that the current user manuals quote, with what it means and the chapter that explains it. The table is built from the manuals each time the site is built, so it follows them. The OpenCarMind EdgeOS 2.0.0 manual is left out, because 2.1.0 shows the same messages and more.

ESP32-S3, OpenCarMind 2.5.1#

Message on the board

What it means

Chapter

“Turning off”

This manual follows the firmware on the repository’s main branch. That build still reports version 2.5.1, but it is newer than the 2.5.1 release on the Releases page. The 2.5.1 release has no BOOT double-click or automatic connection search and no “Turning off” screen, and a new board starts on CarMind E.V instead of R.E.V.

A logger and dashboard that thinks on the board

“Use <name>?”

Planned for a later S3 release, off in this source by default (CONFIG_OBD_BLE_PAIR_CONFIRM): the board asks first. It offers only an adapter with a strong signal, -70 dBm or better, and shows “Use <name>?” with “Strong. Tap = use it” (or “Good” for a weaker signal). Tap BOOT within 5 seconds to pair it. If you do nothing, nothing is saved. Once paired, the adapter also connects at a weaker signal, down to -90 dBm.

The board, an adapter and a card

“Strong. Tap = use it”

Planned for a later S3 release, off in this source by default (CONFIG_OBD_BLE_PAIR_CONFIRM): the board asks first. It offers only an adapter with a strong signal, -70 dBm or better, and shows “Use <name>?” with “Strong. Tap = use it” (or “Good” for a weaker signal). Tap BOOT within 5 seconds to pair it. If you do nothing, nothing is saved. Once paired, the adapter also connects at a weaker signal, down to -90 dBm.

The board, an adapter and a card

“not paired”

Adapter: the adapter’s name, its address, “(saved)” once it is remembered, and its signal strength. Planned for a later S3 release, off in this source by default (CONFIG_OBD_BLE_PAIR_CONFIRM): “paired” or “not paired” in place of the address.

Five pages

“Safe to turn off”

Below the fields are the recent events: Wi-Fi joined, clock set, and the “Safe to turn off” line.

Five pages

“Off, safe to unplug”

Hold 2 seconds. Power off. Let go after 2 seconds. The screen says “Turning off” while it saves and closes the drive, then “Off, safe to unplug”. The backlight and LED go dark. Press BOOT to wake it.

One button does everything

“Forget paired adapter?”

Hold 8 seconds. Forget the saved adapter. The screen asks “Forget paired adapter?”. Tap BOOT within 5 seconds to forget it, or wait to cancel. The board can then pick another adapter.

One button does everything

“On-board model”

Open the Board page and pick the model under “On-board model”.

CarMind R.E.V and CarMind E.V

ESP-Mosaico, OpenCarMind EdgeOS 2.1.0#

Message on the board

What it means

Chapter

“No car yet”

Economy: your fuel economy while you drive. Before a car connects it says “No car yet” and offers Search.

First boot and the orange key

“USB current is not measured”

System: how busy each of the two cores is, in % and MIPS, and the power source. “USB current is not measured” is expected.

First boot and the orange key

“Parked, health good”

Wait about a minute after the start. The top right of the Board page then says “Parked, health good” in green. See Health checks and messages if it says something else.

First boot and the orange key

“From Wi-Fi”

Set the clock. Join Wi-Fi, or use Settings > Set clock. The clock line then says “From Wi-Fi” or “Set by hand”.

First boot and the orange key

“Set by hand”

Set the clock. Join Wi-Fi, or use Settings > Set clock. The clock line then says “From Wi-Fi” or “Set by hand”.

First boot and the orange key

“OBD adapter found: <name>, signal strong. Use this adapter?”

When an adapter answers, a sheet asks “OBD adapter found: <name>, signal strong. Use this adapter?” A weaker one says “signal good”. Under it you see “Nothing is saved unless you choose.” and the seconds left.

First boot and the orange key

“signal good”

When an adapter answers, a sheet asks “OBD adapter found: <name>, signal strong. Use this adapter?” A weaker one says “signal good”. Under it you see “Nothing is saved unless you choose.” and the seconds left.

First boot and the orange key

“Nothing is saved unless you choose.”

When an adapter answers, a sheet asks “OBD adapter found: <name>, signal strong. Use this adapter?” A weaker one says “signal good”. Under it you see “Nothing is saved unless you choose.” and the seconds left.

First boot and the orange key

“OBD adapter paired: <name>”

Tap Use this adapter. The events say “OBD adapter paired: <name>”.

First boot and the orange key

“OBD adapter not paired”

No answer in 30 s: nothing is saved, and the events say “OBD adapter not paired”. The board does not offer that adapter again until you tap Find OBD adapter or restart.

First boot and the orange key

“This adapter looks different. Use it?”

The adapter at your adapter’s address does not match the fingerprint. Under the question you see “Its data is kept apart until you choose.” The drive is still logged but marked, and the learning gets none of it.

First boot and the orange key

“The adapter asks to pair again. Allow?”

Your adapter refused the saved key and wants a new one. That is normal after an adapter reset, and suspicious otherwise. No data flows while the question is open.

First boot and the orange key

“Re-pair refused (driving)”

While driving the board refuses at once, keeps the link and marks the rows. The events say “Re-pair refused (driving)”.

First boot and the orange key

“No windows yet”

AI sees: one bar each for Stopped, Braking, Accelerating and Cruising. The model gives one answer per window, a short slice of the drive. “No windows yet” means it has had no driving to look at.

All 17 apps and what their numbers mean

“Saved on the board”

Saved: the top right says “Saved on the board” or “Not saved yet”

All 17 apps and what their numbers mean

“Not saved yet”

Saved: the top right says “Saved on the board” or “Not saved yet”

All 17 apps and what their numbers mean

“Learning off: E.V in use”

While E.V runs, the cards are dimmed and the page says “Learning off: E.V in use”. R.E.V keeps what it learned.

All 17 apps and what their numbers mean

“One run”

Self-test: at start the board checks the model against known answers. “exact” means it matched. “One run” is how long one answer takes.

All 17 apps and what their numbers mean

“Use R.E.V”

Use button: a 64 px “Use R.E.V” or “Use E.V” button. It reads “In use” for the model running. It works only while parked (see The two models).

All 17 apps and what their numbers mean

“Use E.V”

Use button: a 64 px “Use R.E.V” or “Use E.V” button. It reads “In use” for the model running. It works only while parked (see The two models).

All 17 apps and what their numbers mean

“In use”

Use button: a 64 px “Use R.E.V” or “Use E.V” button. It reads “In use” for the model running. It works only while parked (see The two models).

All 17 apps and what their numbers mean

“Safe to turn off”

Recent events: the board’s event list, newest first. Errors are red, warnings amber, and “Safe to turn off” is green.

All 17 apps and what their numbers mean

“no data”

Row rate: how many rows per second the board logs, in Hz, or “no data”

All 17 apps and what their numbers mean

“Brakes and torque”

The app title reads “Brakes and torque”. Two traces cover the last 60 s.

All 17 apps and what their numbers mean

“E.V estimate (no physics torque yet)”

Source line: the line under the torque trace names the source, for example “E.V estimate (no physics torque yet)”

All 17 apps and what their numbers mean

“Not in a drive”

This drive so far. The top right says “Logging” during a drive and “Not in a drive” between drives.

All 17 apps and what their numbers mean

“No codes”

Status line: “No codes” or the code count, and the MIL state

All 17 apps and what their numbers mean

“S31 rev”

Firmware: the firmware version, and the chip with its revision (“S31 rev” and a number)

All 17 apps and what their numbers mean

“on USB”

Battery: the cell’s voltage in V, its current in mA, “on USB” or “on battery”, and the temperature the fuel gauge measures, in °C. The line below says “uncalibrated” with the charge cycle count until the gauge is set up for this cell. It shows a battery protection state instead when one is active (see Health checks and messages).

All 17 apps and what their numbers mean

“on battery”

Battery: the cell’s voltage in V, its current in mA, “on USB” or “on battery”, and the temperature the fuel gauge measures, in °C. The line below says “uncalibrated” with the charge cycle count until the gauge is set up for this cell. It shows a battery protection state instead when one is active (see Health checks and messages).

All 17 apps and what their numbers mean

“All jobs on time”

Soft deadlines: the scheduler’s job table: each job’s runs, its worst run and how many times it missed its deadline. “All jobs on time” means no misses.

All 17 apps and what their numbers mean

“health pending”

Header: at the top right, the board state and its health, for example “Parked, health good”. Green means good, amber degraded, red bad. During the first minute after a start it says “health pending”. Health checks and messages explains it.

All 17 apps and what their numbers mean

“All good”

The header counts what needs you: “All good” in green, or “1 thing to check” and “2 things to check”. The count is amber when the worst one can wait and red when it needs you now. Learning and slowing down on purpose are not counted.

All 17 apps and what their numbers mean

“1 thing to check”

The header counts what needs you: “All good” in green, or “1 thing to check” and “2 things to check”. The count is amber when the worst one can wait and red when it needs you now. Learning and slowing down on purpose are not counted.

All 17 apps and what their numbers mean

“2 things to check”

The header counts what needs you: “All good” in green, or “1 thing to check” and “2 things to check”. The count is amber when the worst one can wait and red when it needs you now. Learning and slowing down on purpose are not counted.

All 17 apps and what their numbers mean

“Check soon”

A colour, an icon and a word: green “Good”, blue “Learning” (or “Starting”, “Slowed”), amber “Check soon”, red “Act now”. The word is there so you do not have to rely on the colour.

All 17 apps and what their numbers mean

“Act now”

A colour, an icon and a word: green “Good”, blue “Learning” (or “Starting”, “Slowed”), amber “Check soon”, red “Act now”. The word is there so you do not have to rely on the colour.

All 17 apps and what their numbers mean

“Battery is healthy”

A headline, for example “Battery is healthy”.

All 17 apps and what their numbers mean

“Holds 98 % of its rated charge”

One line on what it means, for example “Holds 98 % of its rated charge”.

All 17 apps and what their numbers mean

“Nothing to do”

One line on what to do, or “Nothing to do”.

All 17 apps and what their numbers mean

“Block lifted”

Recent issues. The last five issues of the page with their time, newest first, and the line that says when one ended, for example “Block lifted”. It says “None since the start” until there is one. The list starts again after a restart.

All 17 apps and what their numbers mean

“None since the start”

Recent issues. The last five issues of the page with their time, newest first, and the line that says when one ended, for example “Block lifted”. It says “None since the start” until there is one. The list starts again after a restart.

All 17 apps and what their numbers mean

“resting, 0 mA”

Battery details: the charge level and mode (resting, on battery, charging, topping up), the current (“resting, 0 mA”, “charging +12 mA” or “on battery -118 mA”), power and temperature, the health estimate and where it comes from, the resistance against its first value, the unusual-behaviour check (“learning, 3.2 of 24 h”, “normal” or the alarm), its score against the alarm level, and the detector’s last message.

All 17 apps and what their numbers mean

“charging +12 mA”

Battery details: the charge level and mode (resting, on battery, charging, topping up), the current (“resting, 0 mA”, “charging +12 mA” or “on battery -118 mA”), power and temperature, the health estimate and where it comes from, the resistance against its first value, the unusual-behaviour check (“learning, 3.2 of 24 h”, “normal” or the alarm), its score against the alarm level, and the detector’s last message.

All 17 apps and what their numbers mean

“on battery -118 mA”

Battery details: the charge level and mode (resting, on battery, charging, topping up), the current (“resting, 0 mA”, “charging +12 mA” or “on battery -118 mA”), power and temperature, the health estimate and where it comes from, the resistance against its first value, the unusual-behaviour check (“learning, 3.2 of 24 h”, “normal” or the alarm), its score against the alarm level, and the detector’s last message.

All 17 apps and what their numbers mean

“learning, 3.2 of 24 h”

Battery details: the charge level and mode (resting, on battery, charging, topping up), the current (“resting, 0 mA”, “charging +12 mA” or “on battery -118 mA”), power and temperature, the health estimate and where it comes from, the resistance against its first value, the unusual-behaviour check (“learning, 3.2 of 24 h”, “normal” or the alarm), its score against the alarm level, and the detector’s last message.

All 17 apps and what their numbers mean

“worst time 12.9 ms (limit 1,000 ms)”

AI details: the degradation ladder, the worker’s core, and one card per feature (Battery charge, Battery check, Network guard) with its runs, late runs and skipped runs, “worst time 12.9 ms (limit 1,000 ms)”, the longest a run took from its start time to its end, against its deadline, and “work per run 0.23 ms (budget 2 ms)”, the longest a run computed, against its time budget.

All 17 apps and what their numbers mean

“work per run 0.23 ms (budget 2 ms)”

AI details: the degradation ladder, the worker’s core, and one card per feature (Battery charge, Battery check, Network guard) with its runs, late runs and skipped runs, “worst time 12.9 ms (limit 1,000 ms)”, the longest a run took from its start time to its end, against its deadline, and “work per run 0.23 ms (budget 2 ms)”, the longest a run computed, against its time budget.

All 17 apps and what their numbers mean

“no clock”

Each drive: its session number, size, rows and date. “no clock” stands in for the date when the clock was not set during that drive.

All 17 apps and what their numbers mean

“No saved network yet: search and join one first.”

Sync clock now: sets the clock now from a saved network. With none saved it says “No saved network yet: search and join one first.”

All 17 apps and what their numbers mean

“The board uses them only to set its clock.”

Saved networks: the networks the board knows (up to 8), each with Forget. The note under the list says “The board uses them only to set its clock.”

All 17 apps and what their numbers mean

“CarMind R.E.V active-estimator, self-test exact.”

R.E.V or E.V. The line below names the model in use, its file and its self-test, for example “CarMind R.E.V active-estimator, self-test exact.” A switch works only while parked. If the board refuses a switch, the line starts with “Not switched” and gives the reason. See The two models.

Settings in detail

“Not switched”

R.E.V or E.V. The line below names the model in use, its file and its self-test, for example “CarMind R.E.V active-estimator, self-test exact.” A switch works only while parked. If the board refuses a switch, the line starts with “Not switched” and gives the reason. See The two models.

Settings in detail

“Not set”

The clock line shows the time and date and where the time came from: “Not set”, “Estimated, not synced”, “Set by hand” or “From Wi-Fi”.

Settings in detail

“Estimated, not synced”

The clock line shows the time and date and where the time came from: “Not set”, “Estimated, not synced”, “Set by hand” or “From Wi-Fi”.

Settings in detail

“A drive is active. End the drive first, then set the clock.”

Tap Set clock to open the picker. It has day, month, year, hour and minute rollers and a time zone list. Back cancels. During a drive the board refuses a new time and says “A drive is active. End the drive first, then set the clock.”

Settings in detail

“would block”

Network guard: blocking on or off. On by default. With blocking on, the guard acts after its two-hour shadow. With blocking off it still watches and writes “would block” into the events, but changes nothing. Health checks and messages says what a block does.

Settings in detail

“Wi-Fi held (boot health bad): start it in Wi-Fi”

The first minute after a start is when the board has the least memory to spare, so it keeps Wi-Fi off until its health check (Health checks and messages). When the check says good or degraded, the automatic clock sync goes ahead. If the clock is not set yet, the first sync follows about 20 seconds later. When the check says bad, Wi-Fi stays off until you start it, and the events say “Wi-Fi held (boot health bad): start it in Wi-Fi”. Sync clock now, Search for networks and Join always work, at any time while parked.

Wi-Fi sets the clock, and nothing else

“Saved, secured”

In the search list it reads “Saved, secured” or “Saved, open”. Tap it. The Join page opens with “Saved password” in the field, so you do not type it again. Tap Join. To change the password, type a new one first.

Wi-Fi sets the clock, and nothing else

“Saved, open”

In the search list it reads “Saved, secured” or “Saved, open”. Tap it. The Join page opens with “Saved password” in the field, so you do not type it again. Tap Join. To change the password, type a new one first.

Wi-Fi sets the clock, and nothing else

“Saved password”

In the search list it reads “Saved, secured” or “Saved, open”. Tap it. The Join page opens with “Saved password” in the field, so you do not type it again. Tap Join. To change the password, type a new one first.

Wi-Fi sets the clock, and nothing else

“Not forgotten: a drive is running.”

To remove a network, tap Forget next to it under Saved networks. During a drive the board refuses and says “Not forgotten: a drive is running.” The desktop app can add networks too.

Wi-Fi sets the clock, and nothing else

“Can’t join: the board does not support this network’s security type.”

Enhanced-open (OWE) networks show as secured and ask for a password. WEP and WPA-TKIP-only networks end with “Can’t join: the board does not support this network’s security type.”

Wi-Fi sets the clock, and nothing else

“A drive is active. End the drive first, then switch models.”

During a drive the board refuses and says “A drive is active. End the drive first, then switch models.” When the car’s computer answers but no drive is recorded yet, it says “Not now: the car link is up. Try again later.” While the board only searches for the adapter or connects to it, it stays Parked and the switch works. The board keeps your choice after a restart. Every model mark and name on the screen follows the model in use.

CarMind R.E.V and CarMind E.V

“Not now: the car link is up. Try again later.”

During a drive the board refuses and says “A drive is active. End the drive first, then switch models.” When the car’s computer answers but no drive is recorded yet, it says “Not now: the car link is up. Try again later.” While the board only searches for the adapter or connects to it, it stays Parked and the switch works. The board keeps your choice after a restart. Every model mark and name on the screen follows the model in use.

CarMind R.E.V and CarMind E.V

“Not switched: CarMind E.V refused: ml would miss its deadline.”

A model has to give its answer within 1 second, while the board also reads the car and R.E.V learns. Before it loads a model, the board takes the model’s measured run time from its self-test, doubles it for safety, and checks that every job on that core still finishes on time. If one would not, the board keeps the model it has and says, for example, “Not switched: CarMind E.V refused: ml would miss its deadline.” Here “ml” is the name of the model’s job.

CarMind R.E.V and CarMind E.V

“Boot health: degraded: NAND not mounted”

Degraded: the board runs, but something is off. Amber. The events list names the reason, for example “Boot health: degraded: NAND not mounted”.

The board looks after itself

“Boot health: good”

The result shows at the top right of the Board page, for example “Parked, health good”, and in the events list as “Boot health: good”.

The board looks after itself

“Not now: a drive is running. Try again later.”

the same reason for the clock sync, Format and other actions. Wait until the drive ends.

The board looks after itself

“Not now: the board is starting. Try again later.”

start-up has not finished. Try again a few seconds later.

The board looks after itself

“Not now: an update or format is running. Try again later.”

wait for the format or the restart to finish

The board looks after itself

“Not now: safe mode is on. Try again later.”

the board is in safe mode. Restart it. If it stays in safe mode, send the Board page and the events.

The board looks after itself

“Not now: the board is saving power. Try again later.”

the battery is warm. Let the board cool down. If you tap Sync clock now while the board saves power, the sync waits until the battery has cooled.

The board looks after itself

“ERR busy: …, try again when parked”

the board answers the desktop app with this during a drive

The board looks after itself

“Model deadlines: UI slowed”

The screen draws half as many frames. Events: “Model deadlines: UI slowed”.

The board looks after itself

“Model deadlines: learner paused”

R.E.V’s learning pauses. What it learned is kept. Events: “Model deadlines: learner paused”.

The board looks after itself

“Model deadlines: model paused”

The model pauses. The same model stays loaded. Events: “Model deadlines: model paused”.

The board looks after itself

“Battery hot (45.0 C on USB): load shed”

at 45 °C on USB power, Wi-Fi and R.E.V’s learning stop, the screen dims and changes wait. “Battery cooled” follows at 42 °C.

The board looks after itself

“Battery too hot (60 C): stopped”

at 60 °C the board saves its logs and stops writing. After 30 seconds at 57 °C or below it restarts by itself.

The board looks after itself

“Battery over-voltage (4250 mV): charger fault, stopped”

the cell reached 4.25 V or more, which points to a charger fault. The board saves and stops until you restart it. Unplug it and have the board checked.

The board looks after itself

“Network guard: shadow over, now watching”

the two hours are over.

The board looks after itself

“Network guard blocking: radio flood nearby (p1a2b)”

many new Bluetooth addresses that each appear once, as an attack tool makes them. The code after “p” is a short pattern number, not an address.

The board looks after itself

“Network guard blocking: Wi-Fi beacon flood”

or “Wi-Fi deauth attack”: the Wi-Fi round stopped.

The board looks after itself

“Clock kept: network guard, …”

and “Wi-Fi round stopped: network guard, …”: the round stopped because of a block. Run Sync clock now later, or clear the block first.

The board looks after itself

“Network guard would block: …”

during the shadow, or with blocking off.

The board looks after itself

“Network guard: block lifted, 10 min clean”

and “block cleared by the user”.

The board looks after itself

“Car link slower than usual: rows kept out”

the car link answers much slower than its normal, which can mean a relay between the car and the board. It is a note only: the drive goes on, and the rows are kept out of the learning until “Car link timing normal again”.

The board looks after itself

“Battery is wearing out”

When a new health issue starts, the same banner shows it with an amber edge (“Check soon”) or a red one (“Act now”), the plain headline, for example “Battery is wearing out”, and Open Health. Tap it to open Health on the right page. Swipe it up or sideways, or press the orange key, to just close it. It shows for a battery that wears out, a battery alarm, a guard block and an adapter that looks different. While you drive, amber issues only go into Health’s recent list, and red ones show for 10 seconds so they never stay over the Drive screen. When the issue ends, its banner goes too.

A banner for what is urgent, an app for the rest

“Not safe”

The events list also shows the green Safe to turn off line after every periodic save. When it is not safe, a red “Not safe” line gives the reason.

What is saved where, and when to unplug

“SD card”

Where the app says “SD card”, on the Mosaico it means the board’s own storage.

The desktop app, and flashing new firmware

“Boot health”

Open the events list on the Summary page. The “Boot health” line names the reason. Health checks and messages says what each one means. A restart often clears a one-off problem. If it comes back, send a photo of the Board page and the events.

When something looks wrong

“Not now”

### A change says “Not now”

When something looks wrong

“Clock sync refused: N min ahead”

If the events say “Clock sync refused: N min ahead” (or behind), the time server’s answer was more than a day ahead of the clock, or more than 10 minutes behind it, and the board kept its own time. If you know the clock is wrong, set it by hand. The next sync then sets it.

When something looks wrong