Compatibility#
Waveshare ESP32-S3-LCD-1.47B |
ESP-Mosaico V1.2 (ESP32-S31) |
|
|---|---|---|
Firmware |
OpenCarMind 2.5.1, beta 2.5.1b |
OpenCarMind EdgeOS 2.1.0 |
Build target |
|
|
ESP-IDF |
v6.1 |
v6.1 |
Release download |
||
Flashing |
desktop app, or |
1200-baud door and esptool 5.6.0 or later |
Drive storage |
SD card |
128 MB NAND |
Pairing prompt |
in the source, off by default ( |
on |
Health app and AI services |
no |
yes, since 2.1.0 |
Each image is built for one chip. Do not flash the ESP-Mosaico image on an S3. Other ESP32-S3 boards need the pin map in main/board.h edited.
Adapters#
Classic-only adapters will not work on the S3, which has no Classic radio. The ESP-Mosaico build uses the same Bluetooth LE link through NimBLE, so pick a Bluetooth LE adapter for either board. The full table with the service layouts is on Adapters.
Desktop app#
It runs on Windows, macOS and Linux and talks to both boards over the same USB protocol. Its Flash firmware button is for the ESP32-S3 only. Where the app says “SD card”, on the ESP-Mosaico it means the board’s own storage.