Boards#

ESP32-S3 and the parts list#

  • Board: Waveshare ESP32-S3-LCD-1.47B (the pin map in main/board.h matches it).

  • Or the Espressif ESP-Mosaico V1.2 (ESP32-S31) with the OpenCarMind EdgeOS 2.0.0 build (called mossREV up to 1.2.0). It needs no SD card: see docs/MOSAICO.md.

  • Adapter: a Bluetooth LE adapter that speaks ELM327 commands (see below). Classic Bluetooth adapters will not work, because the S3 has no classic radio.

  • A FAT-formatted SD card.

Adapter compatibility#

Only the LELink has been driven with this board. The other rows come from vendor documents and other open-source OBD projects. docs/ADAPTERS.md has prices and sources. The Amazon links are plain product pages with no affiliate tag, all opened on 3 November 2026.

Adapter

Bluetooth

Built-in profile

Status

Amazon

LELink², LELink

LE

FFE0 / FFE1

tested

B0755N61PW, B00QJRYMFC

Veepeak OBDCheck BLE+, BLE

LE

FFF0 / FFF1 / FFF2

expected

B076XVQMVS, B073XKQQQW

OBDLink CX (sold as the Bimmercode edition, which is the only CX model)

LE 5.1, encrypted

FFF0 / FFF1 / FFF2, pairs on demand

expected

B08NFLL3NT

Carista OBD2, Carista EVO

LE

FFF0 / FFF1 / FFF2

expected

B00YVHGTBM, B0CM9W4MCW

Vgate iCar Pro BLE 4.0

LE

18F0 / 2AF0 / 2AF1

expected

B06XGB4873

Vgate vLinker MC+

LE and Classic

E7810A71 / BEF8D6C9

expected

B088LW211V

Vgate vLinker FS, MS

LE and Classic

E7810A71 / BEF8D6C9

switch to “BLE+BT” in the VgateFwUpdater app first

B0BZTXV6MZ, B0D6YQX4R8

Panlong OBD2 Scanner (PL-B04)

LE, works with Car Scanner on iOS

generic fallback

expected for the “For iOS Android” option only. The “For Android Only” option is likely Classic. The page title does not name the model

B0C1GDJ9ZJ

DA200 (Bluetooth 5.4, “AI Repair Tips”)

LE, PIC18F25K80 ELM327-type chip (maker’s spec sheet)

generic fallback

expected. The page title does not name the model, check for DA200 on the box

B0FH2GJTP8

ELM327 BLE clones (for example RODEDIO)

LE on iOS

FFF0 or FFE0

expected for most. Buy one whose listing says Bluetooth LE for iOS

B0GWQKLTMR

Adapters running the Deep OBD firmware

LE

FFE0 / FFE1 / FFE2

expected

not sold on Amazon. Layout from the Deep OBD source, BtLeGattSppAndroid.cs

FIXD

Bluetooth

unknown

unverified

B013RIQMEO

BlueDriver

Bluetooth

private protocol

not expected

B00652G4TS

V800 full-system scanners (Panlong PL-V800 and white-label copies)

Bluetooth

private app (INNOOBD+)

not expected. The title says “Engine Transmission ABS SRS”, not V800

B0GQ3D57PK

OBDLink MX+, OBDLink LX, KONNWEI KW902

Classic only (LX: Bluetooth 3.0, KW902: Android and Windows only)

none

will not work. The KW902 listing showed “currently unavailable” on 3 Nov 2026

B07JFRFJG6, B00H9S71LW, B073F57QT3

The ESP-Mosaico#

Part

On the ESP-Mosaico V1.2

Chip

ESP32-S31 (ESP32-S31NRV16), dual core, run at 320 MHz

PSRAM

32 MB in the package. The board’s user guide says 16 MB. The chip reports 33,554,432 bytes (esp_psram_get_size(), measured on the board)

Flash

16 MB NOR (GD25Q128): two 6 MB app slots, and 3.75 MB of FAT for the state files

Drive-log store

128 MB SPI NAND (GD5F1GM7UEYIGR) on its own SPI bus, see The 128 MB NAND

Screen

2.16 inch CO5300 AMOLED, 480 x 480, over QSPI

Touch

CST9220 on I2C

Battery

a small cell with a BQ27220 fuel gauge

Radio

Wi-Fi and Bluetooth. OpenCarMind uses Bluetooth LE for the OBD adapter, as on the S3

USB

one Type-C port, the S31’s USB OTG port: console, the desktop app’s USB door, and flashing

There is no SD card slot. The drive logs live on the NAND, and the learned model state, the clock, the settings files and the Wi-Fi list live in the flash FAT.

Unused pins. At boot every GPIO the firmware does not use is put in a safe state: input and output off and no pull resistor, held (the strapping pins 37 to 40 are not held), and the speaker amplifier’s enable (GPIO45) is driven low, so the amplifier stays off. The flash, USB, UART0 console and BOOT pins are never touched. This gives the same pin state at every boot. Its power saving is not measured.

The ESP-Mosaico is Espressif’s board. Its own documentation is at docs.espressif.com.