2.2.0#

  • Setup over USB, so the SD card stays in the board. An authenticated door on the USB cable (main/usb_door.c) takes the pairing, Wi-Fi networks, time zone and settings from the desktop app, and lets the app read the session files. The first pairing needs the 6-digit code the board shows on its screen, and later connections answer an HMAC challenge. Pairing through receiver.json on the card is gone.

  • The desktop app does the setup: a Board page to pair, set Wi-Fi and settings, import drives over USB, and flash the firmware it carries with a bundled esptool, so no ESP-IDF install is needed.